EXPLORE MORE CATEGORIES
PCBA Automatic Soldering System
Wholesale Trader of a wide range of products which include koki spray fluxer, soldering connect system, selective soldering machines, koki reflow system, soldering robot and koki wave soldering system.
KOKI Spray Fluxer
Price on Request
Product Details:
| Model No. | JS-64VFII |
| Before coating | 239.88 g |
| After coating | 241.51 g |
| Adhesion amount | 1.63 g |
| Discharge amount | 2.21 g |
| Coating efficiency | 73.7% |
Features:
- Efficient performance
- Easy to operate
- Unmatched quality
Other Details:
- Preheating PCBs (at 60°C) right before VOC-free flux coating is very effective in improving soldering quality
- Water vapor adhesion to PCBs is decreased by 30%, the interfacial tension becomes low, and solder wettability and uniformity are improved
- Water evaporation in the pre-heater unit becomes fast and plastic fluidity in flux is improved
- The heat resistance pre-flux on PCBs becomes soft
- The spray area (X-Y dimensions) can be precisely set on the LCD monitor, and error messages (e.g. air pressure, flux empty, filter replacement, spray amount trouble) are shown there to simplify condition control on the line
- Flux sub-tank supply control structure enables us to replace flux without stopping the machine
- Flux spraying from ultra-close range has greatly improved coating efficiency and remarkably reduced mist dispersal and particle rebound outward from PCB, which also decreases maintenance frequency and flux usage
Specifications:
| JS-64VFII | VIS-350 | |
| Before coating(g) | 239.88 | 239.82 |
| After coating(g) | 241.51 | 241.56 |
| Adhesion amount(g) | 1.63 | 1.74 |
| Discharge amount(g) | 2.21 | 2.3 |
| Coating efficiency(%) | 73.7 | 75.2 |
Additional Information:
- Item Code: VIS-350
Get Best QuoteRequest Callback
Soldering Connect System
Price on Request
Product Brochure
Product Details:
| Model No | 485 |
| Weight (w/o cord) | 3.5 kg |
| Air Unit Part No. | 486 A |
| Air Pressure | 196-686 kpa (2.7 kgf/cm2) |
| Input Voltage | AC 100 v 50/60 Hz |
| Power Consumption | 850 W |
| Main Unit Part No | 485-1 |
| Temperature setting | Room Temperature to 400 deg C approx |
| Soldering Temperature | Normally 229 deg C (for Sn 63 Pb 37) |
| Capacity of Solder Bath | 10 kg |
| Heating Element | 800 w (400 W x 2) |
| Dimensions | 150(W) x 100(H) x 300(D) mm |
Features:
- Robust construction
- Come with both temperature controlled and time controlled options
- Compact and high performance
Other Details:
- Compact and high-performance soldering system developed for soldering and desoldering components, connectors, LCD display etc. mounted on circuit boards
- The solder flow is both temperature controlled and time controlled
- Many different nozzle sizes are available
- Soldering and desoldering cycles are automatic and precise
- A built-in locator light pinpoints the exact position for component placement
- Solder remaining in the through hole is completely removed by utilizing the air unit
- Customized Nozzles available
Additional Information:
- Item Code: Hakko-485
Get Best QuoteRequest Callback
Selective Soldering Machines
Price on Request
Product Details:
| Model No. | SPA 400 F |
| Material | SS, MS, Alloy steel |
| Standard | SS304/ SS304L / SS316 /SS316L |
| Finishing | Painted |
Features:
- Compact design
- Easy to operate
- Longer service life
Get Best QuoteRequest Callback
KOKI Reflow System
Price on Request
Product Details:
| Material | SS, MS, Alloy steel |
| Technology Used | Cutting Edge |
| Color | White |
| Finishing | Painted |
Features:
- Optimum quality
- Robust construction
- Precise engineered
Other Details:
- The transport conveyor is equipped with a newly designed width-adjustment unit to keep the rails parallel under a high-temperature environment. This unit ensures durable and stable transport of PCBs
- The mist adhering to the cooling unit is collected after being melted by a unique heating system (when the machine stops)
- N2 consumption has been greatly reduced by improving 2 sealing performance of the oven, by adding a labyrinth part to it and by remodeling the mist
Additional Information:
- Item Code: ECOR-4077NA-ECOR-4099NA
Get Best QuoteRequest Callback
Soldering Robot
Price on Request
Product Brochure
Product Details:
| Power requirements | Ac 100 V = or - 10% 50 / 60 Hz 1.0 Kva |
| Air requirement | 0.40.5 Mpa5 kgf / c Dry air |
| Drive method | AC servomotor, Ball screw drive |
| Movement method, No. of control axis | PTP, Total 4-axis control ( 3-axis simultaneous linear and circular interpolation |
| Ambient temp. Humidity, Environment | 040, Non-condensing, no corrosive gas and no significant dust |
Features:
- Optimum quality
- Long working life
- Smooth finish
Other Details:
- AC servo motor was adopted as the drive motor, which realized to "Maintenance Free"
- Each axis enables highly precise operation by ball screw use, and low-speed movement realizes 0.1 mm/s
- It leads to the stability of slide soldering, and also tact time shortening
- The controller, such as "Solder Wire Pre-heater" which is an effective option for lead-free soldering., can be built into three sets at most
- Since a tool mechanism part and a controller part are separable, it can change easily the way to inline and cell production
- A tool part can perform a straight line and circle interpolation and can respond to various slide soldering and point soldering
Specifications:
| Performance of each axis | 0 | Stroke | Positioning repeatability | Max speed | |
| X-axis | 300 mm | ±0.02 mm | 500 mm / s | ||
| Y-axis | 200 mm | ±0.02 mm | 500 mm / s | ||
| Z-axis | 100 mm | ±0.02 mm | 200 mm / s | ||
| R-axis | 360° | ±0.2 | 500°/s |
Get Best QuoteRequest Callback
KOKI Wave Soldering System
Price on Request
Product Details:
| Output Current (Ampere) | 0-100 |
| Automatic Grade | Automatic |
| Cooling Unit | PCB |
| Supply System | N2 |
Features:
- Optimum performance
- High durability
- Sturdy construction
Other Details:
- Easy replacement with a spare solder bath enables the combined use of lead-free solder and currently-used Sn-Pb eutectic solder
- N2 supply system has improved operability and maintainability of the machine by employing a newly developed “nitrogen tunnel structure”, effectively reducing oxide dross of lead-free solder
- The machine can be easily modified from air spec to N2 spec
- The coating unit of spray flux (VIS-350, able to handle VOC-free) can be built-in as an optional extra
- Its high coating efficiency can realize even spray coating without soiling the machine
- The PCB Cooling Unit can resolve lead-free soldering quality troubles, such as SMT land lifting and shrinkage cavity
Standard Equipment:
- Main Conveyor
- Pre-heater
- Solder Bath
- Solder Bath Roll-out Unit (Automatic)
- Cooling Fan
- Inlet Feeder (Chain Conveyor)
- Outlet Feeder (Chain Conveyor)
- Finger Cleaner
- Intermittent Flow Controller
- Main Control Unit
- Emergency Stop Switch
Optional Equipment:
- ŸN2 Middle(Full) Closed Tunnel Structure
- Mist Collection Unit
- Outside Peel-back Point Adjustment Unit
- Warp-prevention Unit (in Solder Bath and Preheater)
- PCB Cooling Unit
- Spare Solder Bath (With carriage : Option)
- Built-in Spray Fluxer
- Dross Separation Unit
- Automatic Solder Supply Unit
- Foaming Fluxer Unit (Flux Controller)
- Auto Width-adjustment Unit
- UPS
- Auto Fire Extinguisher
- Duct Shutter
- Path Line Changer
- PCB Production Counter
- Signal Tower
- Unit for different voltage
Get Best QuoteRequest Callback